Summary:

The medium wire cutting belongs to a type of electric discharge wire cutting, and the electric discharge wire cutting machining technology has been widely used, demonstrating one of the machining methods that other machine tools cannot achieve.

The basic principle of wire electrical discharge machining is to use tool electrodes to pulse discharge the workpiece to achieve machining. Wire electrical discharge machining does not require the production of forming electrodes, and uses thin metal wires (usually called electrode wires) as tool electrodes. The positive pole of the pulse power supply is connected to the workpiece, and the negative pole is connected to the electrode wire; The electrode wire moves back and forth at a certain speed, constantly entering and leaving the discharge area; Simultaneously spray liquid medium between the electrode wire and the workpiece. As long as the operator effectively controls the speed and trajectory of the electrode wire relative to the workpiece, they can cut the required shape and size of the workpiece. The trajectory of the workpiece movement is formed by the coordinate worktable (two controlled stepper motors in the longitudinal and transverse directions) moving in the X and Y directions.

Medium wire cutting is also a type of wire cutting machine tool for electric discharge. Its working principle is to use continuously moving molybdenum wire (known as electrode wire) as an electrode to perform pulse spark discharge on the workpiece to remove metal and cut it into shape. The quality of the processed workpiece is between, so it is called medium wire. To be precise, medium wire is an upgraded product of fast wire, which can be understood as a fast wire that can be cut multiple times. However, its processing and cutting speed is not slower than fast wire, but higher than fast wire. Only in the process of multiple cuts can the cutting speed be reduced to achieve the cutting effect. At this time, the calculation is the average efficiency, not the highest efficiency, and the processing quality tends to slow wire. The wire speed is automatically controlled by the system and can be adjusted as needed.

If you have more questions and concerns about Zhongdao Silk, you can consult with Wang Sheng from Xiufeng Sanno Zhongdao Silk Manufacturing Factory at 13922985987.