Summary:

How to use a fine hole discharge motor? What are the operating procedures of the fine hole discharge machine? What are the safety precautions for fine hole discharge motors? Next, let me introduce the precautions for fine hole discharge motors?

First: Operation steps and process of fine hole discharge machine

The operator of the fine hole discharge motor should carefully read the user manual of the fine hole discharge motor, or obtain knowledge of the various performance and parameters of the fine hole discharge motor from other sources, and be familiar with the machine panel.

Wear personal protective equipment, pay attention to the placement of work to prevent slipping, and prohibit overloading during processing.

Carefully read the drawings for the machining of the fine hole discharge motor and have a thorough understanding of the machining requirements in the drawings.

4. Check the workpiece to see if it can match the drawing, if there are any small holes that cannot be machined, or if there are any materials

5. Check if it is damaged and remove any burrs.

Pay attention to the direction and stroke when setting up the workpiece, as well as whether the zero point setting is reasonable.

When selecting the electrode tube for the 7-hole discharge motor, pay attention to whether it is reasonable, whether it is bent, whether the inspection eye film is clean, and whether the rubber stopper is damaged.

Reasonably set the machining energy for 8 pairs of electrode tubes with different diameters, observe the machining process during operation, and prevent

Copper pipes were melted due to high energy and insufficient water pressure.

After the completion of the 10 hole discharge motor work, the work shaft is raised, and the surface of the workpiece and the machine are cleaned with water. If necessary, the table surface is wiped and the lubricating oil is checked for insufficient.

Secondly, safety precautions for using a fine hole discharge machine

Without permission, non staff members are not allowed to operate the fine hole discharge machine.

Confirm and understand the processing flow and machine precautions before operating the 2-hole discharge machine.

If there is a malfunction in the 3-hole discharge motor, stop it in time for inspection and maintenance. Only after troubleshooting can it continue to work.

Regularly inspect and maintain the fine hole discharge motor, and ensure that the surrounding area is clean and hygienic. There should be no water accumulation that may cause electrical leakage events.

The above are the precautions for using the fine hole discharge motor. If you have any questions or need maintenance about the fine hole discharge motor, you can consult Xiufeng Machinery at 0769-85415566/85548566.